Delta Neo Angle Shower Base Installation: Step-by-Step Guide

Are you looking to upgrade your bathroom with a sleek, modern delta neo angle shower base? You’ve come to the right place. This comprehensive guide will walk you through the installation process step by step, ensuring your new shower base is securely in place and ready to use in no time. Let’s dive right in!

Before we begin, ensure you have all the necessary tools and materials at your disposal. You’ll need an adjustable wrench, screwdriver, level, silicone caulk, and safety equipment such as gloves and goggles. Now, let’s get started!

Preparation and Gear Readiness

The first step is to assemble your installation kit. Each delta neo angle shower base comes with its own kit, which usually includes a shower drain, installation hardware, and instructions specific to your model. Familiarize yourself with these components and ensure none are missing.

Next, ensure your work area is clean and well-lit. Lay out your tools and materials within reach to avoid unnecessary breaks and to maintain focus during the installation process.

Measure and Plan

Proper measurement is crucial to a successful installation. Use a tape measure to ensure your new delta neo angle shower base will fit perfectly into the existing space. Measure the width and length of your current shower base, then compare these measurements to your new base’s dimensions. If any adjustments are needed, now is the time to make them.

Also, check the floor’s slope. Your shower base should be installed with a slight slope, usually around 1/4″ to 1/2″ per foot, to ensure proper water drainage. Use your level to verify this slope and make any necessary adjustments before proceeding.

Old Shower Base Removal

Begin by turning off your home’s water supply and disconnecting the water lines from your old shower base. Use an adjustable wrench to carefully loosen and remove these lines. Once the water supply is secure, remove any tiles or mortar around the old base.

With the help of an assistant, lift the old shower base out of the enclosure. You may need to use a pry bar to help dislodge it. Clear away any remaining debris or residue from the area to prepare for the new base.

Installing the Delta Neo Angle Shower Base

Now that your workspace is clean and prepared, it’s time to install your new delta neo angle shower base. Begin by positioning the base in place, ensuring it aligns correctly with the shower walls and has the proper slope for drainage.

Once the base is in place, use the included hardware to secure it to the subfloor. Drive screws through the pre-drilled holes in the base, being careful not to over-tighten and strip the threads. Use your level to ensure the base remains level throughout this process.

Installing the Shower Drain

Now, it’s time to install the shower drain. Determine the center point of your shower base and mark it with a pencil. Using your tape measure, find the center point of the drain hole in your shower base and mark it as well. Align these two marks to ensure the drain is centered in the base.

Position the drain assembly over the hole in the shower base and trace around it. Use a drill with a hole-saw attachment to cut out this traced area, ensuring the drain fits snugly into the base. Secure the drain to the shower base using the included screws and washers, ensuring it’s watertight and level.

Drain Pipeline and Water Supply Connection

Connect the drain pipeline to the center of the shower drain. Ensure a tight connection by using appropriate pipe joint compound. Next, connect the water supply lines to the faucet and showerhead, ensuring they’re secure and positioned correctly.

Test your connections by briefly turning on the water supply. Look for any leaks around the drain or water supply connections. If any leaks are present, tighten the connections and re-test until no leaks are found.

Finishing Touches

The final step is to apply a bead of silicone caulk along the edge of your shower base, seal any open Joints, and allow it to dry completely. This will create a watertight seal, ensuring no water seepage occurs between the shower base and walls.

Once the caulk has dried, turn on your water supply and test your new delta neo angle shower base thoroughly. Check for any leaks or issues, and make any necessary adjustments. With this, your new shower base is ready to use!

Congratulations on successfully installing your new delta neo angle shower base! This modern and sleek addition will not only enhance your bathroom’s aesthetic appeal but also increase its functionality and longevity. Enjoy your upgraded shower experience!